480-Vacuum Gas Feeder DN-CC Logo SVG icon Brief Specification The chlorinator design shall be of the vacuum operated, solution feed type. The chlorinator shall be constructed of materials suitable for

Series NXT3000 Vacuum Gas Feeder Logo SVG icon Modular design gas feed system with self-contained automatic switchover capability.  The Series NXT3000 Gas Feed System is a family of vacuum-operated, solution-feed gas dispensing

SERIES NXT3000 METER ASSEMBLY Brief Specifications: The meter assembly is designed to complement the Capital Controls’ Series NXT3000 vacuum regulators. The meter assembly is a variable area type meter and

Series 200 flowmeter General: The remote meter panel is designed to complement the Capital Controls® Series 200 vacuum regulators. When multiple chlorine gas feed points from the same vacuum regulator

Series 480 Flow Meter General: The remote meter panel is designed to complement the Capital Controls® Model 480 vacuum regulators. When multiple chlorine gas feed points off the same vacuum regulator

Series 70AV2000 Logo SVG icon Brief Specification The Series 70AV2000 Chloromatic™ control valve is wall-mounted and responds to control signals from a water flow transmitter, a chlorine residual analyzer controller

Series-3000CV in wall panel Series 3000CV Series 3000CV System Previous Next Logo SVG icon Brief Specification The Series 3000CV Chloromatic™ Intelligent Gas Flow Control Valve operates on sonic velocity, no

Series 200 Vacuum gas feeder Logo SVG icon Brief Specification The gas feeder design shall be of the vacuum operated, solution feed type. The gas feeder shall be constructed of materials suitable

Series 2000CV Chloromatic™ Gas Control Valve Series 2000CV Chloromatic™ Gas Control Valve System Previous Next Logo SVG icon General: The Series 2000CV Chloromatic™ control valve operates on sonic velocity, no differential pressure

  8000WP Gas feeders   8000WP Maximum Automatic Control   8000WP Manual Control Previous Next Brief Specifications: Five different flowmeter capacities ranging from 1000 to 8000 lb/day (20 kg/h to 150

Series 3000WP Wall Panel Gas Feeder Specification: The gas feeder shall automatically regulate chlorine gas feed rates in response to flow and/or residual input signals. The panel shall contain an

    Previous Next Specifications: The gas feeder shall automatically regulate chlorine gas feed rates in response to a single flow or PLC input signal. The panel shall contain an

Logo SVG icon Specifications: The floor-mounted gas feeder is enclosed in a corrosion-resistant Polystyrene cabinet. Ten different flowmeter capacities ranging from 10 to 3000 lb/day (200 g/h to 60 kg/h)

SERIES 4200B Logo SVG icon Specifications: Series 4200B floor mounted cabinet gas feeders are vacuum operated, solution feed, differential pressure regulated feeders available with either manual or automatic control. The floor mounted gas feeder is

Series 5200B DN Logo SVG icon Specifications: Series 5200B floor mounted cabinet gas feeders are vacuum operated, solution feed, differential pressure-regulated feeders available with either manual or automatic control. The

Model 1017B Automatic Switchover Logo SVG icon Specifications: The Model 1017B Changeover Controller: is used to provide a fully automatic changeover system to enable bulk gas or liquid sources to be

Logo SVG icon The Automatic Switchover system Series 1041B Series 1041 provides safe, reliable switching between two gas (pressure or vacuum) or two liquid (pressure or level) sources assuring an uninterrupted supply of chemical to the

Inner view Logo SVG icon Specifications: A.          The automatic vacuum switchover module shall be wall mounted and operated on a spring-loaded toggle. The module shall be capable of switching

Logo SVG icon Brief Specifications: The CAPITAL CONTROLS® CHLOR-A-VAC® Series 1520 chemical induction unit offers improved chlorination/dechlorination through the high-efficiency mixing of gaseous or liquid chemicals with process water. CHLOR-A-VAC® features superior, cost-effective design, and

Logo SVG icon Brief Specifications: The CAPITAL CONTROLS® CHLOR-A-VAC® Series 1420 chemical induction unit offers improved chlorination/dechlorination through the high-efficiency mixing of gaseous or liquid chemicals with process water. CHLOR-A-VAC®

Logo SVG icon MicroChem® In General Transmitter/Controller Specifically designed for drinking and wastewater treatment plants, the MicroChem® is able to measure up to three of the following parameters: pH, ORP, Chlorine, Chlorine Dioxide, Conductivity,

Logo SVG icon MicroChem® In General Transmitter/Controller Specifically designed for drinking and wastewater treatment plants, the MicroChem® is able to measure up to three of the following parameters: pH, ORP, Chlorine, Chlorine Dioxide, Conductivity,

Logo SVG icon MicroChem® In General Transmitter/Controller Specifically designed for drinking and wastewater treatment plants, the MicroChem® is able to measure up to three of the following parameters: pH, ORP, Chlorine, Chlorine Dioxide, Conductivity,

Logo SVG icon MicroChem® In General Transmitter/Controller Specifically designed for drinking and waste water treatment plants, the MicroChem® is able to measure up to three of the following parameters: pH, ORP, Chlorine, Chlorine Dioxide,

Logo SVG icon MicroChem® In General Transmitter/Controller Specifically designed for drinking and waste water treatment plants, the MicroChem® is able to measure up to three of the following parameters: pH, ORP, Chlorine, Chlorine Dioxide,

Previous Next Logo SVG icon MicroChem® Transmitter/Controller Specifically designed for drinking and waste water treatment plants, the MicroChem® is able to measure up to three of the following parameters: pH, ORP, Chlorine, Chlorine Dioxide,

Logo SVG icon Chloralert™Series T17CA4000 Chlorine Detector The Chloralert™ Series T17CA4000 is a low-cost, simply operated device designed to detect and provide a warning of the presence of chlorine gas in

Logo SVG icon Chloralert™ Plus Hazardous Gas Monitor  The CAPITAL CONTROLS® Chloralert™ Plus Series 17CA3000 is a state-of-the-art device for rapidly measuring and alarming the ambient presence of low concentrations of toxic gases.  In General:  The

Logo SVG icon Series 1620B Gas Detector CAPITAL CONTROLS® Multipoint Gas Detector Series 1620B provides continuous detection of Chlorine, Sulfur Dioxide or Ammonia gas in a normally clean air environment in up to eight (8)

Logo SVG icon Series 1610B Gas Detector CAPITAL CONTROLS® Single Point Gas Detector, Series 1610B provides continuous detection of Chlorine, Sulfur Dioxide and Ammonia gas in a normally clean air environment.  In General CAPITAL CONTROLS®

Logo SVG icon CAPITAL CONTROLS’ CAPTROL® Series 1451 Controller offers a host of features that make it uniquely suited to control schemes using two inputs such as disinfection,oxidation, and water quality

Logo SVG icon In General: The T17T2000 Amperometric Titrator allows for the determination of residual levels in a water sample and is used to calibrate on-line residual analyzers. The Series 17T2000 Amperometric Titrator

Logo SVG icon In General The Capital Controls®  vacuum regulator is a spring-opposed diaphragm type design which serves, via the throttling action of the inlet valve, to reduce the gas from a varying

Previous Next Logo SVG icon Specifications: EJ100C – EJ200C – EJ500C The ejector is the heart of the system providing the vacuum necessary to operate the vacuum regulator. The diaphragm ejector

Previous Next Logo SVG icon Series EJ17C1 is a Multipurpose Ejector For On/Off, Anti-siphon, Backpressure  to 200 PSIG The EJ17 ejector is a triple check design that is operated by the flow of

Previous Next Logo SVG icon Fixed Orifice Flanged Ejector EJ2000C The ejector/check valve assembly shall be of the chlorine water solution feed type and shall create the vacuum necessary to

Previous Next Logo SVG icon Fixed Orifice Flanged Ejector EJ6000C  The ejector/check valve assembly shall be of the chlorine water solution feed type and shall create the vacuum necessary to

Previous Next Logo SVG icon 2″ Fixed Orifice Sonic & Non-sonic Ejector 806E06**** A back-flow check valve and an emergency overflow drain valve within the ejector, prevent water or process liquid from entering

Logo SVG icon Series 71V3B Vaporizer The CAPITAL CONTROLS® Series 71V3B electrically-heated vaporizer automatically vaporizes and superheats liquid Chlorine, Sulfur Dioxide or Ammonia at a rate controlled by the gas feed system.  The vaporizer

Logo SVG icon Specifications: The CAPITAL CONTROLS® Series 71P11A Gas Pressure Reducing and Shut-Off Valve is a diaphragm-type gas pressure regulating valve designed for use on chlorine, sulfur dioxide and ammonia gas service. The valve

Previous Next Logo SVG icon Neutrlization Tower & Caustic Soda Tank Chlorine Gas Scrubber Scrubber System is designed to neutralize a 1 Ton Chlorine Container at worst case leakage.  Constructed

Logo SVG icon Specifications: The De Nora Water Technologies gas filter is intended for the filtration of the gaseous phase of chlorine, sulfur dioxide or ammonia. It is recommended for use on a pressurized

Logo SVG icon The DeNora/EST “Mobile Break-Point Gas Arrestor” (MB-PGATM) is used to create a vacuum for capturing and neutralizing fugitive chlorine emissions often experienced at connection breaks in chlorine (STS media)

Logo SVG icon The CAPITAL CONTROLS® VEGA™ is a disposable chlorinator vacuum regulator vent gas arrestor designed to treat occasional chlorine gas vent releases that may accompany Chlorine container changeovers

Logo SVG icon Flexible Connector1. Flexible Connectors are avilable in Lengths 2 m ,3 m,4 m.2. Lead Gaskets must be used to be connected to an isolation valve,Header valve. For more

Logo SVG icon Ton container Trunnions Trunnion base is fabricated steel, epoxy coated to resist corrosion. Rollers are galvanized steel. Frames have holes in ends to attach to floor with

Logo SVG icon Ton container Lifting Bar  Maximum Capacity (2200 kgs). Finish Industrial Yellow. All welded steel ( U shapped 120 mm) Epoxy coated.  For more information, please contact us.

Logo SVG icon NEXA packed plunger head pump is the simplest and most suitable solution for dosing and transferring non-hazardous liquids. Very precise plunger surface finishing, with increased hardness for

Logo SVG icon NEXA hydraulic double diaphragm head pump is the ideal solution for applications requiring high levels of operational safety and reliability. Zero leakage and watertight construction make it

Logo SVG icon Overview: Meeting and exceeding API 675 3rd Edition STD, full-motion chemical injection pumps. These state-of-the-art pumps are designed with internal mechanisms (number of strokes/1’ is independently selected