EJ100C – EJ200C – EJ500C
The ejector is the heart of the system providing the vacuum necessary to operate the vacuum regulator. The diaphragm ejector is to be used in continuous feed applications.
The ejector/check valve assembly shall be of the chlorine water solution feed type and shall create the vacuum necessary to operate the system.
The ejector/check valve assembly shall be a spring-opposed, O-ring seal, diaphragm type. The ejector/check valve shall be suitable for 100 PPD/2 kg/h against a maximum back pressure of (Please Fill In psig). The springs shall be tantalum alloy.
The ejector shall be furnished with a water inlet assembly. DE NORA WATER TECHNOLOGIES, INC. ADVANCE BM-5112
The following ejector spare parts shall be provided:
1. One (1) set ejector diaphragms.
2. One (1) set ejector gaskets.
3. One (1) wall mount bracket.
Capacity up to 10 kg/h.
The ejector may be installed in any position, since the check valve is spring actuated. (However, downward water flow may cause cavitation and poor vacuum).