The remote meter panel is designed to complement the Capital Controls® Series 200 vacuum regulators. When multiple chlorine gas feed points from the same vacuum regulator are required, a remote meter panel is utilized. Each remote meter panel is manually set, via the rate valve, to meter the proper amount of chlorine gas to the feed point. The combined gas feed rate from the remote meters must not exceed the total feed rate capacity of the vacuum regulator.
NOTE: When remote meter panels are desired to be used for gas flow indication only, the rate valve at the vacuum regulator is used to adjust gas flow. Therefore, if the vacuum regulator has a rate valve, the remote meter’s rate valve should be removed and replaced with a plug.
Capacity: (10 kg/h) Maximum Capacity
