Products

MicroChem® 450 Controller

The MicroChem® 450 controller is packed with a wide range of features that ensure disinfection control is working at peak performance. Uniquely suited to control

Chlorine Cylinders

Capacities available: 50 and 65 KG One opening – valve connection. for more information please contact us.

Emergency Repair Kit type B

Previous Next Logo SVG icon Ton container Emergency Repair Kit type B, to stop leaks in either cylinder valves,fusible plug, or cylinder body – Local

Ton Chlorine Container

Previous Next Logo SVG icon The cylinders can be used frequent filling of liquid chlorine under a working pressure of 21 bar, having the following

Pulsation Damper

Previous Next Overview Pulsation damper is crucial to stabilize flow and pressure in circuits with the pumps, minimize or eliminate pulsations to increase the lifetime

Over Pressure Valves

Logo SVG icon Overview Exakta PRM valves are designed to protect piping from undesired overpressure. They are available in different sizes and materials coming as

Back Pressure Valves

Previous Next Overview Exakta pressure retaining valves, with their compact and reliable set up, are suitable for applications where a constant back pressure is requested.

Safety Valves

Previous Next Overview The safety valves are used to protect personnel and equipment from excessive pressure accumulation in a number of applications. Exakta

Calibration Pot

Previous Next Logo SVG icon Overview Exakta in house designed calibration pot, with its simple and accurate design, is available in 2 material configurations (316L-PVDF), granting

Emergency Repair Kit type B

Previous Next Logo SVG icon Ton container Emergency Repair Kit type B, to stop leaks in either cylinder valves,fusible plug, or cylinder body – Local

Lifting Bar

Logo SVG icon Ton container Lifting Bar Maximum Capacity (2200 kgs). Finish Industrial Yellow. All welded steel ( U shapped 120 mm) Epoxy coated. For

Ton container Trunnions

Logo SVG icon Ton container Trunnions Trunnion base is fabricated steel, epoxy coated to resist corrosion. Rollers are galvanized steel. Frames have holes in ends

Flexible Connector

Logo SVG icon Flexible Connector1. Flexible Connectors are avilable in Lengths 2 m ,3 m,4 m.2. Lead Gaskets must be used to be connected to

AWT Neutrlization Tower & Caustic Soda Tank Chlorine Gas Scrubber

Previous Next Logo SVG icon Neutrlization Tower & Caustic Soda Tank Chlorine Gas Scrubber Scrubber System is designed to neutralize a 1 Ton Chlorine Container

Series AS****C Automatic Switchovers

Inner view Logo SVG icon Specifications: A. The automatic vacuum switchover module shall be wall mounted and operated on a spring-loaded toggle. The module

Model 1041B Automatic Switchover

Logo SVG icon The Automatic Switchover system Series 1041B Series 1041 provides safe, reliable switching between two gas (pressure or vacuum) or two liquid (pressure or level) sources assuring an

Model 1017B Changeover Controller

Model 1017B Automatic Switchover Logo SVG icon Specifications: The Model 1017B Changeover Controller: is used to provide a fully automatic changeover system to enable bulk gas

Series 2000CV Chloromatic™ Gas Control Valve

Series 2000CV Chloromatic™ Gas Control Valve Series 2000CV Chloromatic™ Gas Control Valve System Previous Next Logo SVG icon General: The Series 2000CV Chloromatic™ control valve operates

Series 3000CV Chloromatic™ Intelligent Gas Control Valve

Series-3000CV in wall panel Series 3000CV Series 3000CV System Previous Next Logo SVG icon Brief Specification The Series 3000CV Chloromatic™ Intelligent Gas Flow Control Valve

Series 70AV2000 Gas Control Valve for Pressurized Ammonia

Series 70AV2000 Logo SVG icon Brief Specification The Series 70AV2000 Chloromatic™ control valve is wall-mounted and responds to control signals from a water flow transmitter,

SERIES 5200B CAPACITIES UP-TO (200 KG PER H)

Series 5200B Capacites UP-TO (200 kg/h)

Series 5200B DN Logo SVG icon Specifications: Series 5200B floor mounted cabinet gas feeders are vacuum operated, solution feed, differential pressure-regulated feeders available with either

SERIES 4200B Logo SVG icon Specifications: Series 4200B floor mounted cabinet gas feeders are vacuum operated, solution feed, differential pressure regulated feeders available with either manual or automatic control. The

Series 4100B UP-TO (60 KG/H)

Logo SVG icon Specifications: The floor-mounted gas feeder is enclosed in a corrosion-resistant Polystyrene cabinet. Ten different flowmeter capacities ranging from 10 to 3000 lb/day

CHLOR-A-VAC® Series 1420

Logo SVG icon Brief Specifications: The CAPITAL CONTROLS® CHLOR-A-VAC® Series 1420 chemical induction unit offers improved chlorination/dechlorination through the high-efficiency mixing of gaseous or liquid

CHLOR-A-VAC® Series 1520

Logo SVG icon Brief Specifications: The CAPITAL CONTROLS® CHLOR-A-VAC® Series 1520 chemical induction unit offers improved chlorination/dechlorination through the high-efficiency mixing of gaseous or liquid chemicals with process water.

Chlorine Cylinders

Capacities available: 50 and 65 KG One opening – valve connection. for more information please contact us.

Ton Chlorine Container

Previous Next Logo SVG icon The cylinders can be used frequent filling of liquid chlorine under a working pressure of 21 bar, having the following

MicroChem® 450 Controller

The MicroChem® 450 controller is packed with a wide range of features that ensure disinfection control is working at peak performance. Uniquely suited to control

CAPTROL® Series 1451 Controller

Logo SVG icon CAPITAL CONTROLS’ CAPTROL® Series 1451 Controller offers a host of features that make it uniquely suited to control schemes using two inputs such

All
Dosing Pumps
Radix Series
NEXA Series
Accessories
3C Triplex Series

Pulsation Damper

Previous Next Overview Pulsation damper is crucial to stabilize flow and pressure in circuits with the pumps, minimize or eliminate pulsations to increase the lifetime of the pump and accessories. Features Exakta can offer different solutions for each and every need: Bladder damper, with its multiple alternative combinations for body Read More

Over Pressure Valves

Logo SVG icon Overview Exakta PRM valves are designed to protect piping from undesired overpressure. They are available in different sizes and materials coming as standard: AISI316L PVDF and PVC. Other options are available on request.The compact and reliable construction along with highly chemical resistant elastomer/PTFE diaphragm, ensure Exakta PRM Read More

Back Pressure Valves

Previous Next Overview Exakta pressure retaining valves, with their compact and reliable set up, are suitable for applications where a constant back pressure is requested. When the discharge pressure is less than 2 bar, valves are strongly recommended to increase the pump accuracy while preventing gravity-induced siphon effect. The PSV Read More

Safety Valves

Previous Next Overview The safety valves are used to protect personnel and equipment from excessive pressure accumulation in a number of applications. Exakta can offer an extensive range of screwed and flanged valves in a variety of sizes, options and materials to comply with the strictest international standards.

Calibration Pot

Previous Next Logo SVG icon Overview Exakta in house designed calibration pot, with its simple and accurate design, is available in 2 material configurations (316L-PVDF), granting full compliance with all pumped fluids. The stress relieved borosilicate glass of the calibration pot body allows clear visibility without environmental attack or chemical risk while Read More

Pressure Gauge

Previous Next Overview Exakta pumps can be equipped with mechanical pressure measuring gauges designed to resist the most severe operating conditions created by the ambient environment and the process medium. Pressure gauges are built to measure gaseous or liquid media which do not have high viscosity or do not Read More

Pressure Switch

Logo SVG icon Overview Exakta, can on request, provide pumps complete with diaphragm seal piston sensors in explosion proof housing, for hazardous areas, with an accuracy class 2% f. s. Features Flameproof enclosure according to ATEX, UL, CSA Safe to adjust during operation 1 switching contact (SPDT) SIL2 (IEC 61508)

AKTUA Electrical actuator

aktua blue AKUTA quarter view AKTUA is our in-house designed electrical actuator series made to automatically, remotely and proportionally adjust pump flow rate. With its simple set up and installation, internal display 4–digit, 7–segment, AKTUA can even be calibrated while the pump is running and is available in an ATEX-compliant Read More

Kosmo

Logo SVG icon Overview Representing one of our most flexible chemical dosing solutions, the Kosmo range of motor-driven diaphragm pumps offers consistently accurate and reliable performance in applications as diverse as reverse osmosis, cooling water and potable water treatment. Superior operation across a range of flow rates up to 2,300 Read More

3C Series Triplex pumps

Gallery item name 3C Triplex Pumps SeriesProcess pumps for high-pressure duties TRIPLEX 3C 30 Flow rate from 0.21- 5.14 m3/h Pressure from 1146 – 46 bar Plunger diameter from 10 – 50 mm Motor Power 2.2 – 15 kW TRIPLEX 3C 55 Flow rate from 1.18- 14.48 m3/h Pressure from Read More

Radix Series – Model WS

Logo SVG icon Overview Simplicity, reliability and easy installation are the key features of this line. Behind the new WS series lies the technical innovation of a double diaphragm sandwich with a spring return operating mechanism. Combining the advantages of volumetric pumps with the sealless nature of diaphragms, hydraulic diaphragm Read More

Radix Series – Model D

Logo SVG icon Overview Economical and reliable, with a mechanically actuated diaphragm, this model D is an ideal solution for industrial applications where chemicals have to be pumped safely at low pressure. A low maintenance requirement also provides an additional reason to invest in this model. The D Radix Series Read More

Radix Series – Model K

Logo SVG icon Overview: Offering good economy, reliability and a low maintenance requirement, the K Model is an ideal solution for industrial applications where chemicals have to be pumped safely at low pressure. The K Radix Series pump adopts the principle of the eccentric rotor with spring return to control Read More

Radix Series (ALL)

ExaktaRadix Series – Model K1FeaturesExaktaRadix Series – Model K2FeaturesExaktaRadix Series – Model DFeaturesExaktaRadix Series – Model WSFeatures Previous Next Logo SVG icon Overview Economical and reliable, the Exakta Radix series offers the ideal solution for accurate injection and dosing of industrial chemicals. The range features low noise worm gear with Read More

Elektra

Logo SVG icon Elektra series combines the reliability of the spring return motor driven pump with a remote data management and programming system, featuring a broad range of flow rates, including high flow rate up to 1000 l/h at up to 20 bar. Elektra pump brings the ultimate in precision Read More

Nexa Series HN

Logo SVG icon Overview: Meeting and exceeding API 675 3rd Edition STD, full motion (both mechanically and hydraulically) chemical injection pumps. These state-of-the-art pumps are designed with internal mechanism (number of strokes/1’ is independently selected by Exakta based on the application and, in case of multiple heads each unit has Read More

Nexa Series TN

Nexa Series YN

Nexa Series PN

Logo SVG icon Overview: Meeting and exceeding API 675 3rd Edition STD, full-motion chemical injection pumps. These state-of-the-art pumps are designed with internal mechanisms (number of strokes/1’ is independently selected by Exakta based on the application and, in case of multiple heads each unit has its own reduction gear allowing Read More

Nexa Series BN

Logo SVG icon NEXA hydraulic double diaphragm head pump is the ideal solution for applications requiring high levels of operational safety and reliability. Zero leakage and watertight construction make it suitable for dosing toxic, corrosive and other hazardous liquids. The PTFE double diaphragm, compatible with a variety of liquids, means Read More

Nexa Series KN

Logo SVG icon NEXA packed plunger head pump is the simplest and most suitable solution for dosing and transferring non-hazardous liquids. Very precise plunger surface finishing, with increased hardness for a longer working life, perfect alignment of the plunger in the seal and adjustable seal for flushing or leakage recovery Read More

Local AWT Products

AWT has a variety of products manufactured at its factory

PRODUCTS